Products — Hollow Sections, Steel Sheet, Fencing, Structural

Section 01

Hollow sections & tube

Square hollow sections bundled, cut ends facing the camera — Square hollow section

Wall of stacked rectangular hollow sections — Rectangular hollow section

Large circular hollow sections stacked — Circular hollow section

Rectangular hollow sections with mill marking — Mill-marked sections

Square hollow sections — SHS

EN 10219 · S235 / S275 / S355 · 15×15 – 260×260 mm · wall 1.5 – 12 mm

The full square run, from light framing sections to 260×260 structural boxes.

Rectangular hollow sections — RHS

EN 10219 · S235 / S275 / S355 · 30×10 – 300×200 mm · wall 1.5 – 12 mm

Rectangular sections through to 300×200, in the same grades, lengths and finishes.

Circular hollow sections — CHS

EN 10219 · S235 / S275 / S355 · Ø17.2 – Ø323.9 mm · wall 1.5 – 10 mm

Welded round tube across the full diameter range; intermediate wall thicknesses on enquiry.

Section 02

Steel sheet

Chequer sheet stacked, diamond pattern in the light — Chequer sheet

Chequer tread sheet stack, raised pattern visible — Tread sheet

Profiled steel sheet with coated finish — Profiled sheet

Hot-rolled sheet

EN 10025-2 · S235 / S275 / S355 · formats to 2000×12000 mm

Standard formats from 1000×2000; widths 700–2000 mm. Surface to EN 10163.

Cold-rolled sheet

EN 10130 · DC01

Pickled & oiled

S235 / S275 / S355

Hot-dip galvanised sheet

EN 10346 · DX51D+Z

Chequer / tread sheet

base 3 – 8 mm (3/4.5 – 8/10) · 1250×2500 · 1500×3000 mm

Decking sheet

trapezoidal profile · width, length and finish to specification

Roof and floor decking profiles — profile drawings on request.

Perforated sheet

round Rv · square Qg · slotted · to specification

Section 03

Fencing & wire

Welded mesh fence panels stacked, green PVC-coated and galvanised — Welded mesh panels

Green PVC-coated welded mesh panels strapped on a pallet — PVC-coated panels

Rolls of galvanised chain-link fencing — Chain-link rolls

Green PVC-coated chain-link mesh — PVC-coated chain-link

Welded mesh panels — 2D & 3D

mesh 50×200 · 50×100 mm · h 1.0 – 2.4 m · wire Ø4 – 6 mm

Rigid welded fence panels, galvanised or PVC-coated.

Gabion cages

mesh 80×100 mm · 1×1×1 · 2×1×1 · 2×1×0.5 m · Ø2.7 – 4 mm

Welded baskets in galvanised, Galfan or PVC finish.

Chain-link

h 0.9 – 3.0 m · mesh 40 / 50 / 60 mm · wire Ø2.0 – 4.0 mm

Line & tying wire

Ø1.4 – 5.0 mm · galvanised · galvanised + PVC

Barbed & razor wire

twin-strand · standard coil diameters

Posts & fittings

40×40 · 50×50 · 60×40 · 60×60 mm · caps · clips · straining posts

Section 04

Structural & long products

Structural I-section beams, cut ends facing the camera — IPE / IPN beams

Stacked UPN steel channels — UPN channels

Wide-flange steel beams stacked in the yard — HEA / HEB beams

Stacked equal angle sections, painted and mill finish — Equal angles

Beams — IPE / IPN

IPE 80 – 600 · IPN 80 – 600 · EN 10025

Wide-flange beams — HEA / HEB

HEA 100 – 1000 · HEB 100 – 1000

Channels — UPN / UPE

UPN 50 – 400 · UPE 80 – 400

Angle — equal & unequal

equal 20×20 – 200×200 · unequal 30×20 – 200×150 · EN 10056

Bar — flat · round · square

flat 20 – 150 × 3 – 20 mm · round Ø8 – 100 mm · square 8 – 50 mm

Hot-rolled merchant bar to EN 10058 / 10059 / 10060.

S235

General structural and fabrication grade — excellent formability and weldability. Engineering, architectural and decorative work, fencing, light structures.

S275

Structural grade with higher yield — the UK and European mainstream for building frames and general structural steelwork.

S355

High-strength structural grade — heavy frames, trailers and load-bearing members needing a higher strength-to-weight ratio.

Section 05

Special profiles & tube

Semi-oval steel tube bundle, D-shaped cut ends — Oval & semi-oval tube

Ribbed ornamental steel tube, patterned surface — Ornamental profiles

Cold-formed lipped steel frame profiles stacked — Cold-formed frame profiles

Cold-formed lipped steel sections stacked end-on — ZP frame profiles

Pressure-tested pipe

EN 10255 · Ø26.9 – Ø88.9 mm · L 6 m

Hydro pressure-tested welded pipe.

Oval & semi-oval tube

EN 10219 · 30×15 · 38×20 mm · wall 1.5 – 2 mm

Welded oval and D-section tube for railings, furniture and architectural work.

ZP window & door profiles

DIN 59413 · S235 · wall 1.5 / 2 mm · types 1A – 11C

Cold-formed frame sections for steel windows and doors.

Decorative & ornamental profiles

S235 · mill or galvanised finish

Textured, twisted and patterned bar and tube for gates, railings and balustrades.

Built-up sections

to 2000×800 mm · wall to 32 mm · length to 20 m

Merged square and rectangular profiles for box columns and heavy frames — made to order.

Certification

Documented, certified, traceable

MILL CERTIFICATES

EN 10204 — 2.2 / 3.1

Type 2.2 as standard; Type 3.1 for structural and certified work.

HOLLOW SECTIONS

EN 10219-1/-2 · CE + DoP

Cold-formed sections CE marked, with a Declaration of Performance.

STRUCTURAL & BAR

EN 10025 · EN 10056 · EN 10058–60

European sections, angle and merchant bar to the applicable standards.

FLAT PRODUCTS

EN 10130 · EN 10346 · EN 10163

Cold-rolled, galvanised and surface standards across the flat range.

FABRICATION

EN 1090 — EXC2

Through our certified fabrication partner; Declaration of Performance issued per project.

MANAGEMENT SYSTEMS

ISO 9001 · 14001 · 45001

Quality, environmental and health & safety systems; EN 15804 EPD available.

Send a size and grade list, or a project bill of materials, and we quote it line by line.

Request a quote Download the matrix